JUKI LK-1900S Series Instruction Manual page 29

❼
❽
－
3) Press EDIT key
DATA CHANGE key
The item data that can be edited are as de-
scribed in "(2) Listing of item data" p.29
4) Set the X scale rate to "50" %, Y scale rate to
"80" % and sewing speed to "2000" sti/min, re-
spectively.
5) The "X enlargement/reduction ratio" display 0.0
is displayed by pressing EDIT key
The amount of travel in X direction can be set in
increments of 0.1 mm. Change the set value to
"0.5" with DATA CHANGE key
6) The "Y enlargement/reduction ratio" display 0.0
is displayed by pressing EDIT key
The amount of travel in Y direction can be set in
increments of 0.1 mm. Change the set value to
"−1.0" with DATA CHANGE key
－
27
❽ . Edit the item data with
❼ .
".
❽ .
❼ .
❽ .
❼ .