Table of Contents
Advertisement
Volume adjustment
In non-setting mode, adjust the volume from 0 to 31dB using the▲/▼button.
The minimum volume is 0dB.
●
The maximum volume is 31dB.
●
The default is 25dB.
●
Pairing
Once the parameters are set, push the "
pairing data will be sent to the transmitter via ultrasonic transmitter for
parameter synchronization. The indicator will flash rapidly while the data are
being transmitted. When the synchronization is completed, the receiver will
receive the corresponding channel or frequency and the indicator will stop
flashing. If the signal is not received for a certain period of time, the indicator
will flash slowly to inform pairing failure (the slowly flashing indicator can be
reset by pushing any button).
Note: The best pairing distance is 30cm, ±30º.
-30 +30
Minimum volume at 0db; maximum
volume at 31dB
" button and the digital
20~80cm
26
Hide quick links:
Advertisement
Table of Contents
