Install The Seat - Kohler C3-225 Installation Manual

5. Install the Seat

Align the slot on the mounting plate with the groove located below the
¨
toilet seat. Slide the seat onto the mounting plate until you feel is snap into
place.
NOTE: The mounting plate may need to be adjusted to properly align the seat.
For Toilets with Threaded Inserts:
To adjust the seat position, remove the seat (see Homeowners Guide) and
¨
reposition the mounting plate needed.
Reinstall the seat. Repeat the adjustment procedure as needed until seat is
¨
properly aligned.
Once the seat is positioned as desired, remove the seat and securely tighten
¨
down the mounting plate.
Reinstall the seat.
¨
For All Other Installation:
No need to remove the seat for seat position adjustment, as shown in
¨
Fig 2. Adjust the position seat and mounting plate only by loosening nuts
and tightening nuts when they are adjusted to properly align the seat.
1103349-X2-C
Mounting
Plate
6 Kohler Co.