Page 1
Installation Guide Toilet Seat with Bidet Functionality K-4107KR 中国上海市宝山区丰翔路1955号 邮编:200444 English page 1-8 中 文 页 码 9-14 한글 페이지 15-21 繁 體 頁 碼 22-27 1219877-KR01-B...
Page 2
Please ensure sufficient ventilation in your surroundings to prevent possible damage to electronic components. 1219877-KR01-B Kohler Co.
Page 3
Otherwise, the inlet pipe thread may wear off and lead to water leakage. Unplug the seat and drain it, if the seat is not being used for an extended period of time. Kohler Co. 1219877-KR01-B...
Page 4
Flush the toilet to relieve any pressure from the water supply hoses. Position a container under the fill valve to catch any excess water. Disconnect the water supply hose from the toilet fill valve. Remove the existing toilet seat. 1219877-KR01-B Kohler Co.
Insert a bolt through the mounting plate and the toilet mounting holes. Position the washers so they rest in the grooves of the mounting plate. Thread a nut onto each of the bolts. Handtighten the nut. Kohler Co. 1219877-KR01-B...
For All Other Installations: No need to remove the seat for seat position adjustment. Adjust the position seat and mounting plate only by loosening nuts and tighten nuts when they are adjusted to properly align with the seat. 1219877-KR01-B Kohler Co.
NOTE:Flush the water supply pipes thoroughly to remove debris. The product is designed for tap water. Make sure not to use industrial water/grey water/black water/sea water for the water supply. Check all connections for leaks and make any adjustments as needed. Kohler Co. 1219877-KR01-B...
1/3 from the front of the seat (sensor area). Proceed to the “Operation” section of the Homeowners Guide to test the various seat functions. 1219877-KR01-B Kohler Co.