Kohler C3-225 Installation Manual page 9

Metal chain
Tank cover
1
8. Installation of Flushing Actuator
Remove the tank cover.
¨
Place flushing actuator above the sealed floating ball in the tank.
¨
NOTE: When installing the flushing actuator, you can adjust
the position of stainless steel so as to fit the tank cover properly.
Connect the salient point of the rotary table on "flushing
¨
actuator" and the hang clasper on the "sealed floating ball"
with "metal chain".
NOTE:
1. Buckling and hanging points on the "sealed floating ball" shall be near to the
floating ball.
2. Twining on the primary manually lifting and pulling metal strip is not
allowed.
3. When installing the metal chain, you need to adjust the length of the chain
tailored to tank mechanism (Adjust S-hook to the proper position in the
chain, ensuring the chain is fully stretched and locked straight by S-hook).
Rotate the auto flush dial manually. Ensure the dial can lift up the sealing
¨
float completed in the rotation to achieve best flushing effect.
Press key
¨
Cover the tank cover properly.
¨
Kohler Co.
Sealed floating
ball
Stainless steel
Rotary table
Flushing
actuator
to double confirm the flushing mechanism works smoothly.
Flushing
actuator
2
Sealed floating
ball
Bump
3
4
9
S-hook
1103349-X2-C