Kohler C3-225 Installation Manual page 8

Installation Step:
45 mm
＞
6 m
7. Installation of Remote Control Holder
Choose a mounting location for the remote holder that is easily accessible
¨
while sitting on the seat.
Drill two holes with depth larger than 45 mm on the wall by drill with a
¨
diameter of 6 mm in accordance with the position of screw holes on the
remote control holder. Installing the expansion tube into the holes.
Place the installation holder on the fixing hole.
¨
Peel off the release paper of double-sided tape at the back of holder.
¨
Fix the holder with screws and install it.
¨
Install the screw covers on the screws.
¨
Place the remote controller on the holder.
¨
NOTE: If the wall for installation is made
of special material (such as wood board,
density board and etc.), suitable fixing
methods shall be adopted.
1103349-X2-C
m
Remote
Control
Expansion
Remote Holder
Tube
Screw cover
8
Double-Sided
Tape
Expansion
Screw
Kohler Co.