Virtual Usb I/O Routing - Native Instruments TRAKTOR KONTROL Z2 Manual

Loop Recorder Controls
Button
Button 1
Button 2
Button 3
Button 4
The LEDs are brightly lit when the buttons are active.
6.6

Virtual USB I/O Routing

A word on the routing of the virtual USB channels in the software.
USB Outputs
▪ USB OUT 1/2: This signal is fed directly to the Main bus of the Z2 mixer. This signal goes
straight to the XLR/TRS/RCA outputs (via their
when the CUE MIX
have no affect on this output.
▪ USB OUT 3/4: This signal is fed directly to the headphones and requires that the
knob is counter-clockwise in order to hear.
USB Inputs
▪ USB IN 1/2: This is the mic/aux signal.
▪ USB IN 3/4: This is the Channel A Phono or Line Input (depending on the position of the
PH/LN switch).
▪ USB IN 5/6: This is the Channel B Phono or Line Input (depending on the position of the
PH/LN switch).
▪ USB IN 7/8: This is the output of the entire mixer routed back to the computer for the pur-
pose of recording.
Function
Size (LED is blue)
Undo (LED is blue)
Record (LED is red)
Play (LED is green)
knob is set clockwise. The crossfader and individual volume faders
VOLUME knobs) and to the headphones
TRAKTOR KONTROL Z2 - Manual - 81
Appendix
Virtual USB I/O Routing
CUE MIX