Level Meters - Native Instruments TRAKTOR KONTROL Z2 Manual

5.4.20

Level Meters

The level meters in between the volume faders on the top panel.
The Z2's level meters are located right above the crossfader. In their factory default setting,
they show the left/right master output ("MST" on the Z2) and the mono-summed levels of
Decks A and B.
By changing the mixer settings (see
to indicate the levels of Decks C and D instead of the master output.
Crossfader Reverse Indicator
The XF REVERSE indicator lights up at the bottom of the levels display when the
switch is activated (on the front panel of the Z2, see also
Crossfader Reverse only affects a channel in Direct mode. Refer to the TRAKTOR Manual
for further information on Direct mode.
↑5.4.13, Status/Mode Indicators) you can set the display
↑5.3, Front
TRAKTOR KONTROL Z2 Hardware Reference
XF REVERSE
Panel).
TRAKTOR KONTROL Z2 - Manual - 62
Top Panel