Filter And Eq Knob Snap - Native Instruments TRAKTOR KONTROL Z2 Manual

While playing the track from a stored cue point, the virtual timeline is indicated with the extra green playhead, and the Flux
Mode indicator flashes in the Deck Header.
To toggle Flux mode on Deck A:
Press the Flux button on the left of the Z2; to toggle Flux mode on Deck B, press the Flux
►
button on the right.
Note that Flux mode is Deck-specific. In other words, you can have Deck A in normal mode
and Deck B in Flux mode at the same time.
For further information about Flux mode, please see the TRAKTOR manual.
4.5

Filter and EQ Knob Snap

The Z2's FILTER and EQ knobs are pretty much self-explanatory. However, there is a feature
that is worth checking out which lets you create a classic "jump cut" filter or EQ effect:
1. With a track playing in Deck A, turn the
you turn the knob, you will hear the lower frequencies being gradually cut off.
2. Now press and hold
you turn the knob, you won't hear any difference.
3. When the knob is back in the center position, release the
FILTER
SHIFT while turning the
Using the Z2 with TRAKTOR (TRAKTOR Mode)
knob to the right (to cut the low end). As
FILTER knob back to the center position. As
SHIFT button.
TRAKTOR KONTROL Z2 - Manual - 28
Filter and EQ Knob Snap