Native Instruments TRAKTOR KONTROL Z2 Manual page 44

These encoders control a number of looping and moving (BeatJumping) functions in TRAK-
TOR, as described in the following table:
Action
Rotate encoder
Press encoder
Hold SHIFT and rotate encoder while looping
Hold SHIFT and rotate encoder while NOT looping
Hold SHIFT and press encoder while looping
Hold SHIFT, press and hold encoder and turn to the left Reset Deck's beatline to the start. This returns the
Holding the SHIFT
quick and easy way to "reset" your track to the very beginning, even if you have no cue
points set there.
Loop Size Displays
One of the 7-segment displays displaying a loop/move size on the Z2.
The displays display the loop (or move) length as a number. The displays blink when the asso-
ciated track is looping. In addition, they display various options when you press the Z2's Set-
tings button (↑5.4.13, Status/Mode
Result
Increases or decreases the loop size
Creates a loop of the specified size, starting at the
current playing position.
The Loop Size display flashes when the loop is active.
If a loop is already active, Loop mode will be deacti-
vated.
Moves the position of the active loop by the size
amount.
BeatJump the current track in forward or back (de-
pending on rotation direction) in current loop sized
jumps. For example, turning to the right when the
loop size is set to 4 will BeatJump forward by four
beats.
Stop looping (Same as pressing encoder without
SHIFT
track to the beginning.
button while pressing and turning the
Indicators).
TRAKTOR KONTROL Z2 Hardware Reference
while looping).
LOOP (SIZE) encoder left is a
TRAKTOR KONTROL Z2 - Manual - 44
Top Panel