Usb Connections - Native Instruments TRAKTOR KONTROL Z2 Manual

The Z2 can be powered by any stable AC source (50-60 Hertz) between 115 and 230
Volts.
5.2.2

USB Connections

The USB connectors on the rear panel.
Connects the Z2 to your computer with the included USB cable. In addition, the Z2 has a
built-in two-port USB hub for any peripheral devices, such as additional controllers or hard
drives, for example.
The USB port (Type B) connection to your computer is specially-designed to withstand par-
ticularly demanding (party!) performance situations. When plugging your USB cable into
the rear panel of the Z2, you'll notice this extra-tight grip to prevent accidental slippage.
For an overview of the Z2's internal USB routing, refer to
TRAKTOR KONTROL Z2 Hardware Reference
↑6.6, Virtual USB I/O Routing.
TRAKTOR KONTROL Z2 - Manual - 33
Rear Panel