Using The Cue/Sample Trigger Buttons; Changing Deck Focus For The Cue/Sample Trigger Buttons; Working With Cue Points - Native Instruments TRAKTOR KONTROL Z2 Manual

4.3

Using the Cue/Sample Trigger Buttons

The Cue/Sample Trigger buttons
and delete cue points and loops, trigger Sample Slots (in Remix Decks) and BeatJump through
your tracks.
For a detailed overview of these buttons' functions, refer to
Section (1, 2, 3,
4.3.1

Changing Deck Focus For The Cue/Sample Trigger Buttons

The default focus of the Cue/Sample Trigger buttons is Deck A on the left side and Deck B on
the right side. But you can change the Deck focus from A to C or from B to D by pressing the
corresponding Deck Focus button.
To change the focus of the Cue/Sample Trigger buttons:
Press a Deck Focus button
►
Trigger buttons.
4.3.2

Working with Cue Points

When loading a track which has no stored loops or cue points for the first time, the first
cue point will be set to the beginning of the track automatically. This is a quick way to re-
cue a track to the beginning right from the Z2. You can always delete this default cue point
and set the first cue point somewhere else in the track by pressing
Trigger button 1.
To set a cue point at the current playback position:
1. Set the Deck focus on the Z2 to the Deck containing the track where you want to set your
cue point (see also
2. Push an empty (not illuminated) Cue/Sample Trigger button
of the Z2 control Decks A or C (depending on the Deck focus you have set) and the but-
tons on the right control Decks B or D (also depending on the Deck focus). The button
lights up blue to indicate that a cue point is stored there.
(1 to 4 on each side of the Z2) make it possible for you to set
4).
(A or C, and B or D) to change the focus of the Cue/Sample
↑4.3.1, Changing Deck Focus For The Cue/Sample Trigger
Using the Z2 with TRAKTOR (TRAKTOR Mode)
Using the Cue/Sample Trigger Buttons
↑5.4.5, Cue/Sample Trigger
SHIFT + Cue/Sample
Buttons).
(1 to 4). Buttons on the left
TRAKTOR KONTROL Z2 - Manual - 24