Using The Z2 With Traktor (Traktor Mode); Basics; Connecting The Z2 - Native Instruments TRAKTOR KONTROL Z2 Manual

4

Using the Z2 with TRAKTOR (TRAKTOR Mode)

Although the TRAKTOR KONTROL Z2 can be used as a solid stand-alone DJ mixer, it becomes
most powerful when used with the TRAKTOR software, combining the advantages of a stand-
alone mixer and fully-integrated controller in one unit.
4.1

Basics

In this section, we will walk you through some typical scenarios to demonstrate some of the
most common use cases when using the Z2 with TRAKTOR. You might want to refer to
TRAKTOR KONTROL Z2 Hardware Reference
↑5, TRAKTOR KONTROL Z2 Hardware
er, plug, and display are described in more detail.
In addition, you should refer to the TRAKTOR 2 Manual in case you are uncertain about
specific TRAKTOR functionality.
The Z2 is essentially a two-channel mixer. Although you do have some control of TRAK-
TOR's Decks C and D, the Z2's focus is on two-channel mixing. Therefore, some of the con-
trol possibilities are limited to Decks A and B and are not available for Decks C and D, in
order to keep the Z2 relatively compact and easy-to-use.
4.1.1

Connecting the Z2

Please refer to the separate Setup Guide (see also
structions on installing the TRAKTOR software, registering the product, and connecting the
hardware.
Here's a quick run-down of the hardware setup:
1. Connect the TRAKTOR KONTROL Z2 to AC power and turn the unit on (rear panel
switch).
2. Connect the Z2 to your computer with a USB cable (included with the Z2).
3. Start TRAKTOR for the first time and set up the software for use with the Z2 using the
Setup Wizard (see also Setup Guide,
while going through the following workflows. In
Reference, specific functions of each switch, knob, fad-
↑1.3.1, The Setup
↑1.3.1, The Setup Guide).
Using the Z2 with TRAKTOR (TRAKTOR Mode)
Guide) for detailed in-
TRAKTOR KONTROL Z2 - Manual - 17
Basics
↑5,