Safety Symbols and Cautionary Information Installation-Related Safety Instructions Consignes de sécurité importante Symboles de sécurité et informations de mise en garde Instructions de sécurité relatives à l'installation Product Specifications HIPR30S, HIPR36S Ranges Included Accessories Needed Tools Installation Requirements Pre-installation Checklist General Requirements...
The wiring diagram is in an envelope attached to the inside of the rangetop. Customer-Assurance Information To resolve questions and installation issues, contact your Dacor dealer or Dacor Customer Assurance. Before calling, have ready the range’s model/serial numbers, which are on the rating label on the back of the range.
Important Safety Instructions Safety Symbols and Cautionary Information Electrical equipment can be dangerous if handled improperly. The Important Safety Instructions in this manual are intended to minimize the risk of property damage, personal injury, and death. Carefully follow the instructions in this manual. About the Symbols In This Manual SAFETY SYMBOLS/ALERTS The icons at left alert you to potentially unsafe condi-...
Important Safety Instructions Installation-Related Safety Instructions • Read these instructions thoroughly to reduce the risk of property damage, fire, personal injury, and death, and to ensure proper installation. • These safety instructions cover installation-related safety issues. For use-and-care-related safety instruc- tions, including general use, electrical, cooktop, and oven safety, see the User Manual.
Page 6
Important Safety Instructions Installation-Related Safety Instructions, cont. Read these instructions thoroughly to reduce the risk of property damage, fire, personal injury, and death, and to ensure proper installation. Fire Safety • Do not store/place/use combustible items (e.g., paper, plastic, fabrics, gasoline) near the range. •...
Consignes de sécurité importantes Symboles de sécurité et informations de mise en garde L'équipement électrique peut être dangereux s'il n'est pas manipulé correctement. Les consignes de sécurité importantes (pages 7 à 9) ont pour but de minimiser le risque de dommages matériels, de blessures corpo- relles et de mort.
Consignes de sécurité importantes Instructions de sécurité relatives à l'installation • Lisez attentivement ces instructions pour réduire les risques de dommages matériels, d'incendie, de blessures corporelles et de mort, et pour assurer une installation correcte. • Ces consignes de sécurité couvrent les problèmes de sécurité liés à l'installation. Pour les consignes de sécurité relatives à l'utilisation et aux soins, y compris l'utilisation générale, la sécurité...
Installation Requirements Pre-Installation Checklist F Before installing the range, read this manual thoroughly. F Plan for a location where the range will not be subject to strong drafts. F Remove packaging from the range. F Verify that all items are present before beginning the installation. General Requirements Clearances and Dimensions •...
Page 12
Installation Requirements General Requirements, cont. Product Dimensions (tolerances: ±¹/₁₆” or ±1.6 mm) HIPR30: 29 7/8” (75.9 cm); HIPR36: 35 7/8” (91.1 cm) Critical Depth/Height Dimensions Range Only Range With Downdraft...
Page 13
5. Does not apply to cabinets that horizontally are over 10” (25.4 cm) from the range edge. APPROVED DOWNDRAFT VENTS Range Downdraft Vent IMPORTANT: See the downdraft instal- lation instructions for duct and electrical HIPR30S MRV30 installation requirements. Use only the HIPR36S MRV36-ER specified Dacor downdraft models.
Installation Instructions Preparing for Installation • If the gas or electric service provided does not meet the product specifications, discontinue installation, and call the dealer, gas supplier, or a licensed electrician. • Before moving the range into place, install the anti-tip bracket (see below for instructions). Unpacking the Range Unpack the parts box, and verify that all specified components are present (see Pg.
Page 16
Installation Instructions Preparing for Installation, cont. Installing the Anti-tip Bracket and Foot, cont. Floor-Mounting the Anti-tip Bracket, cont. • Determine the anti-tip bracket location (see the diagram below). Mark the 4 hole locations on the floor. • Determine screw size. Minimum full thread depth (portion of screw threaded into the sub-floor) is 3/8” (1 cm) for wood and 5/8”...
Page 17
Installation Instructions Preparing for Installation, cont. Installing the Anti-tip Bracket and Foot, cont. Wall-Mounting the Anti-tip Bracket For this option to be suitable, the forward edge of the range's front panel must be 26 1/2” (67.3 cm) or less from the wall, and the bracket screws must be able to engage the base plate inside the wall. Notches on the sides of the bracket indicate the minimum height of the base plate to ensure secure threading.
Page 18
Installation Instructions Preparing for Installation, cont. Removing the Oven Door So the range is easier to move, remove the door(s) to reduce the weight. • Do not try to disengage the hinge catches with the door(s) removed. The hinge springs could release, caus- ing personal injury.
Making the Electrical Connection • Wire the range according to local ordinances. • Improperly connected electrical wiring can lead to electric shock and appliance damage. Dacor is not re- sponsible for damage due to improper electrical connection. • Connect the ground terminal (or lead) on the range to a grounded, metallic, permanent wiring system or grounding conductor.
Page 20
Installation Instructions Making the Electrical Connection, cont. Connecting the Conduit to the Range For instructions on how to connect the power cord, see Pg. 24. Remove the range's electrical-access cover (see left). 2. (4-wire only) Loosen the grounding screw (E), and re- move the neutral-to-ground jumper link (D).
Page 21
Installation Instructions Making the Electrical Connection, cont. Connecting the Conduit to the Home Junction Box Do not connect the range’s green wire to the neutral (white) supply wire unless local code allows. • The power supply must be properly polarized so the burner igniters do not keep sparking after ignition. •...
Owner: You are ultimately responsible for ensuring that the range was installed properly by a qualified tech- nician. Dacor is not responsible for property damage or product failure due to improper installation. F Was the plastic sheeting peeled off the outside of the range? F Was all packaging removed from the oven chamber? F Were the leveling legs lowered to the floor and the unit leveled? (Pg.
Installation Instructions Verifying Proper Operation • Before operating the range, read the User Manual completely to familiarize yourself with important safety, service, and warranty information. • This procedure instructs you how to verify the function of the oven and each cook zone on the cooktop. See the User Manual for verification of other features.
Page 24
Dacor – 14425 Clark Avenue, City of Industry, CA 91745 – Phone (800) 793-0093 – Fax (626) 403-3130 – www.dacor.com...
Need help?
Do you have a question about the HIPR30S and is the answer not in the manual?
Questions and answers