Page 1
* Including raised embosses on sides of chassis Front of cooktop Power cord Gas inlet 2 1/8” (5.4 cm) 5/8” Chassis (1.6 cm) HPCT304G Power Cord and Gas Inlet Location Top panel overhang All specifications subject to change without notice. www.dacor.com Ph. 800.793.0093...
Page 2
* Including raised embosses on sides of chassis Front of cooktop Gas inlet Power cord in 2 1/4” (5.7 cm) 1” (2.5 cm) Chassis HPCT365G Power Cord and Gas Inlet Location Top panel overhang All specifications subject to change without notice. www.dacor.com Ph. 800.793.0093...
(see previous graphic). • See the Gas/Electrical Requirements table (this page). • Choose an easily accessible electrical outlet so the cooktop can be unplugged for service/maintenance. All specifications subject to change without notice. www.dacor.com Ph. 800.793.0093...
• Carefully check the cooktop installation site. Situate the cooktop away from drafts and wet areas. • Use the cooktop with a suitable vent hood or approved Dacor downdraft. Installation must allow: • at least 1/4” (6 mm) clearance between the bottom of the cooktop chassis and all combustible surfaces, including the edges and corners of drawers under the cooktop.
Need help?
Do you have a question about the Heritage HPCT304G and is the answer not in the manual?
Questions and answers