Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
FTS24129
1
FT50483BK
1
FT50504
FT50504
1
FTS98003
2
FT95066
1
75160003252
1
FTLOCK
1
FTAS12
1
FTAS16
1
FTREGCARD
1
FT24129I
2007-18 JEEP WRANGLER
1.75-5" CHROMOLY FRONT TRACK BAR
1.75-5" CHROMOLY FRONT TRACK BAR
CHROMOLY FRONT TRACK BAR
HARDWARE SUBASSEMBLY
HARDWARE SUBASSEMBLY
3/4" ROD END
MISALIGNMENT
JAM NUT 3/4-16 RH
THREAD LOCKING COMPOUND
STICKER FT BLUE 10X4
DRIVER WARNING DECAL
REGISTRATION CARD
INSTRUCTIONS
FT24129i
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Fabtech FTS24129
Summary of Contents for Fabtech FTS24129
-
Page 1: Installation Instructions
INSTALLATION INSTRUCTIONS FTS24129 1.75-5” CHROMOLY FRONT TRACK BAR FT50483BK CHROMOLY FRONT TRACK BAR FT50504 HARDWARE SUBASSEMBLY FT50504 HARDWARE SUBASSEMBLY FTS98003 3/4” ROD END FT95066 MISALIGNMENT 75160003252 JAM NUT 3/4-16 RH FTLOCK THREAD LOCKING COMPOUND FTAS12 STICKER FT BLUE 10X4 FTAS16... - Page 2 Check for frame and suspension damage prior to installation. The installation of this suspension system should be performed by two professional mechanics. This suspension must be installed with Fabtech shock absorbers. Use the provided thread locking compound on all hardware.
- Page 3 3. Install the 3/4” jam nut onto the rod end until its stops. 2500-5000 miles for wear and replace as required. Then, install the rod end into the new Fabtech track bar. NOTE: When the rod end is adjusted all the way in RE-TORQUE ALL NUTS, BOLTS AND LUGS equals stock length.
Need help?
Do you have a question about the FTS24129 and is the answer not in the manual?
Questions and answers