Advertisement
Table of Contents
Tool List: (Not Included)
o Floor Jack
o Jack Stands
o Assorted Metric and S.A.E Sockets & Allen Wrenches
READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING
INSTALLATION!
THIS KIT IS DESIGNED FOR USE ON VEHICLES WITH A C.V. REAR DRIVE SHAFT. IF
YOUR VEHICLE DOES NOT HAVE A C.V. REAR DRIVE SHAFT, ONE WILL HAVE TO MADE
BY YOUR LOCAL DRIVE LINE SHOP.
2000 - 2005 FORD EXCURSION 4WD
REAR BOX KIT FOR REPLACEMENT LEAF SPRINGS & BLOCKS
Qua
Part #
2
FTS281
2
FTBK15
1
FTS85
4
FT351U
1
FT58H
2
FT22091i
FTS22091
PARTS LIST:
Description
Leaf Spring
Lift Block
4.5" Rear Bumpstop
U-Bolts
Nut & Washer Kit
Instruction Sheet
Advertisement
Table of Contents
Related Manuals for Fabtech FTS22091
Summary of Contents for Fabtech FTS22091
- Page 1 2000 - 2005 FORD EXCURSION 4WD REAR BOX KIT FOR REPLACEMENT LEAF SPRINGS & BLOCKS FTS22091 PARTS LIST: Part # Description FTS281 Leaf Spring FTBK15 Lift Block FTS85 4.5" Rear Bumpstop FT351U U-Bolts FT58H Nut & Washer Kit FT22091i Instruction Sheet...
- Page 2 4. Remove the OEM rear bump stops and replace them with the new urethane units. Use the included 3/8” hardware. 7. Install Fabtech shock part number FTS7266 (not included) with the factory hardware and torque bolts to 65lbs. 8. Install tires and wheels and torque lug nuts to wheel manufacturer’s specifications.
Need help?
Do you have a question about the FTS22091 and is the answer not in the manual?
Questions and answers