Tektronix WVR7200 Declassification And Security Instructions page 10

Clear and Sanitize Procedures
Clear Diagnostic Log
Procedure
Clear IP and SNMP
Address Fields Procedure
4
7. Rename all Preset Groups and all Presets to generic names.
8. Press the PRESET button to exit the menu.
1. Press the CONFIG button. Then select Utilities > View Diagnostic Log.
Press SEL to display the log.
2. Press > until the box by "Erase Log" is highlighted. Then press SEL to
remove all entries in the diagnostic log.
3. Press > until the box by "Exit" is highlighted. Then press SEL to exit the
log display.
4. Press the CONFIG button to exit the configuration menu.
1. Press the CONFIG button. Then select Network Settings.
2. Select IP Config Mode and set it to Manual to display the IP address.
3. Navigate to IP Address. Then press > to enter the edit mode. Enter
"000.000.000.000" for the IP address.
4. Repeat Step 3 for the Subnet Mask, Gateway Address, SNMP Trap Address
1 through SNMP Trap Address 4, and Network Front Panel FP1 Address
through FP4 Address.
5. Select Instrument Name, navigate to Clear, and press the SEL button.
6. Repeat step 5 for SNMP Public Community, SNMP Private Community,
and Web password.
7. Press the CONFIG button to exit the configuration menu.
WVR7200 Declassification and Security Instructions