Sealing Plug-In Unit - ABB Relion 620 Series Installation Manuals
Hide thumbs
Also See for Relion 620 Series:
- Technical manual (1224 pages) ,
- Operation manual (152 pages) ,
- Applications manual (90 pages)
Table of Contents
Advertisement
1MRS757641 E
4.2.3
620 series
Installation Manual
GUID-A73E4627-E4BB-4ED9-9122-B1C6F0BBC006 V1 EN
Figure 5:
Pushing the plug-in unit into the case
A 7 mm
3.
Turn down the handle to push the plug-in unit into its final position in the case.
The handle must be locked or sealed to secure the mechanical
performance under any conditions caused by vibration,
pressure, shock or bump, seismic activity or other equivalent
circumstances.
Sealing plug-in unit
The front panel of the protection relay has an integrated sealing screw. By default the
screw is screwed all the way in and is not used when installing or detaching the plug-
in unit.
1.
Open the sealing screw about nine turns.
2.
Thread a sealing wire through the holes in the sealing screw and the handle.
A
Section 4
Mounting
15
Advertisement
Table of Contents
