Help Guide
Interchangeable Lens Digital Camera
α7RIII
ILCE-7RM3
Cleaning Mode
If dust or debris gets inside the camera and adheres to the surface of the image sensor (the part that converts the light to an
electric signal), it may appear as dark spots on the image, depending on the shooting environment. If this happens, follow the
steps below to clean the image sensor.
Confirm that the battery has been charged sufficiently.
1
MENU →
(Setup) → [Cleaning Mode] → [Enter].
2
The image sensor vibrates a little to shake off the dust.
Turn off the product following the instructions on the screen.
3
Detach the lens.
4
Use the blower to clean the image sensor surface and the surrounding area.
5
Attach the lens.
6
397