Table of Contents
Advertisement
Help Guide
Interchangeable Lens Digital Camera
α7RIII
ILCE-7RM3
Zebra Setting
Sets a zebra pattern, which appears over part of an image if the brightness level of that part meets the IRE level that you have
set. Use this zebra pattern as a guide to adjust the brightness.
MENU →
(Camera Settings2) → [Zebra Setting] → desired setting.
1
Menu item details
Zebra Display:
Sets whether to display the zebra pattern.
Zebra Level:
Adjusts the brightness level of the zebra pattern.
Hint
You can register values to check the correct exposure or overexposure as well as the brightness level for [Zebra Level]. The settings for correct
exposure confirmation and overexposure confirmation are registered to [Custom1] and [Custom2] respectively in the default settings.
To check the correct exposure, set a standard value and the range for the brightness level. The zebra pattern will appear on areas that fall within
the range you set.
To check the overexposure, set a minimum value for the brightness level. The zebra pattern will appear over areas with a brightness level equal to
or higher than the value you set.
Note
The zebra pattern is not displayed on devices connected via HDMI.
4-728-781-11(1) Copyright 2017 Sony Corporation
171
Advertisement
Table of Contents
