Iso - Sony ILCE-7RM3 Help Manual

Help Guide
Interchangeable Lens Digital Camera
α7RIII
ILCE-7RM3

ISO

Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher the
sensitivity.
ISO (ISO) on the control wheel → select desired setting.
1
You can also select MENU→
You can change the value by 1/3 EV steps by turning the front dial as well as by turning the control wheel. You can
change the value by 1 EV steps by turning the rear dial.
Menu item details
ISO AUTO:
Sets the ISO sensitivity automatically.
ISO 50 – ISO 102400:
Sets the ISO sensitivity manually. Selecting a larger number increases the ISO sensitivity.
Hint
You can change the range of ISO sensitivity that is set automatically in [ISO AUTO] mode. Select [ISO AUTO] and press the right side of the
control wheel, and set the desired values for [ISO AUTO Maximum] and [ISO AUTO Minimum].
Note
[ISO AUTO] is selected when using the following functions:
[Intelligent Auto]
When the ISO sensitivity is set to a value lower than ISO 100, the range for recordable subject brightness (dynamic range) may decrease.
The higher the ISO value, the more noise will appear on the images.
The available ISO settings will differ depending on whether you are shooting still images, shooting movies, or shooting slow-motion/quick-motion
movies.
When shooting movies, ISO values between 100 and 32000 are available. If the ISO value is set to a value larger than 32000, the setting is
automatically switched to 32000. When you finish recording the movie, the ISO value returns to the original setting.
When shooting movies, ISO values between 100 and 32000 are available. If the ISO value is set to a value smaller than 100, the setting is
automatically switched to 100. When you finish recording the movie, the ISO value returns to the original setting.
When you select [ISO AUTO] with the shooting mode set to [P], [A], [S] or [M], the ISO sensitivity will be automatically adjusted within the set
(Camera Settings1) → [ISO].
175