Cont. Bracket - Sony ILCE-7RM3 Help Manual

Help Guide
Interchangeable Lens Digital Camera
α7RIII
ILCE-7RM3

Cont. Bracket

Shoots multiple images while automatically shifting the exposure from base to darker and then to lighter. You can select an image
that suits your purpose after recording.
Press / (Drive Mode) of the control wheel → [Cont. Bracket].
1
You can also set the drive mode by selecting MENU→
Select the desired mode using the right/left side of the control wheel.
2
Adjust the focus and shoot the image.
3
The base exposure is set at the first shot.
Keep pressing and holding the shutter button until bracket shooting is finished.
Menu item details
For example, the camera shoots a total of three images continuously with an exposure value shifted by plus or minus 0.3 EV
when [Cont. Bracket: 0.3EV 3 Image] is selected.
Note
The last shot is shown on the auto review.
When [ISO AUTO] is selected in [Manual Exposure] mode, the exposure is changed by adjusting the ISO value. If a setting other than [ISO AUTO]
is selected, the exposure is changed by adjusting the shutter speed.
When the exposure is compensated, the exposure is shifted based on the compensated value.
Bracket shooting is unavailable in the following shooting modes:
[Intelligent Auto]
When the flash is used, the product performs flash bracket shooting, which shifts the amount of flash light even if [Cont. Bracket] is selected. Press
the shutter button for each image.
(Camera Settings1) → [Drive Mode].
118