Table of Contents
Advertisement
Help Guide
Interchangeable Lens Digital Camera
α7RIII
ILCE-7RM3
Shooting still images with a higher resolution (Px. Shift Multi Shoot.)
You can create images with a higher resolution than is possible with regular shooting by recording four RAW images and then
combining them on a computer. This is helpful when shooting still subjects such as works of art or architecture.
Select MENU →
(Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [Off] beforehand.
MENU →
(Setup) → [USB Connection] → [PC Remote].
1
Connect the camera to a computer using a USB cable, and then launch Imaging Edge (Remote) on the
2
computer.
Secure the camera using a tripod. Perform [Px. Shift Multi Shoot.] using Imaging Edge (Remote).
3
The camera will record four RAW images with the selected interval. The images will be saved on the computer along with
the combined image.
Try to avoid camera shaking or blurring of the subject.
The four RAW images are recorded with the same settings. You cannot change the settings during the interval between
the recordings.
You can cancel the recording by pressing the center of the control wheel during the interval between the recordings.
If you will not be using a flash (sold separately), select a one-second shooting interval in Imaging Edge (Remote). If
using a flash, set the interval according to the charging time of your flash.
The flash-syncing speed is 1/13 second. When [Exposure step] is set to [0.5EV], the shutter speed cannot be set faster
than 1/10 second.
For techniques for [Px. Shift Multi Shoot.], refer to the following support site.
http://www.sony.net/psms/
Hint
You can also perform [Px. Shift Multi Shoot.] without using Imaging Edge (Remote). Select MENU →
Shoot.] and set the recording interval, and then perform shooting. You can import the four recorded RAW images in the computer and combine
them using Imaging Edge (Viewer). If you will not be using Imaging Edge (Remote) for shooting, use a Wireless Remote Commander (sold
separately) or the [Self-timer] function in order to avoid camera shaking and subject blurring.
Note
If camera shaking and subject blurring occurs, the RAW images recorded with [Px. Shift Multi Shoot.] may not be combined properly. Even when
(Camera Settings1) → [Px. Shift Multi
1
Advertisement
Table of Contents
