Table of Contents
Advertisement
Help Guide
Interchangeable Lens Digital Camera
α7RIII
ILCE-7RM3
Wireless Flash
There are two methods for wireless flash shooting: light-signal flash shooting that uses the light of the flash attached to the
camera as a signal light, and radio-signal flash shooting that uses wireless communication. To perform radio-signal flash shooting,
use a compatible flash or the Wireless Radio Commander (sold separately). For details on how to set each method, refer to the
instruction manual of the flash or the Wireless Radio Commander.
Remove the shoe cap from the camera, and then attach the flash or the Wireless Radio Commander.
1
When performing wireless flash shooting with a flash attached, set the attached flash as the controller.
MENU →
(Camera Settings1) → [Wireless Flash] → [On].
2
Set up an off-camera flash that is set to wireless mode, or that is attached to the Wireless Radio
3
Receiver (sold separately).
Press the AEL button on the camera to perform a test flashing.
Menu item details
Off:
Does not use the wireless flash function.
On:
Uses the wireless flash function to make an external flash or flashes emit light at a distance from the camera.
Setting of the AEL button
We recommend that you set MENU →
performing wireless flash shooting.
Note
The off-camera flash may emit light after receiving a light signal from a flash used as the controller of another camera. If this occurs, change the
channel of your flash. For details on how to change the channel, refer to the instruction manual for the flash.
For the flash that is compatible with wireless flash shooting, visit the Sony website, or consult your Sony dealer or local authorized Sony service
facility.
(Camera Settings2) → [
Custom Key] → [AEL Button] to [AEL hold] when
218
Advertisement
Table of Contents
