Using A Flash With A Sync Terminal Cord - Sony ILCE-7RM3 Help Manual

Help Guide
Interchangeable Lens Digital Camera
α7RIII
ILCE-7RM3

Using a flash with a sync terminal cord

Open the cover of
1
Hint
If the screen is too dark to check the composition, set [Live View Display] to [Setting Effect OFF] to make it easy to check the composition when
shooting with a flash.
Flashes that have a sync terminal with reversed polarity can be used with this product.
Note
Set the exposure mode to manual exposure (other than ISO AUTO is recommended for ISO sensitivity), and set the shutter speed to the slower of
the following values or slower:
1/200 seconds
The shutter speed recommended by the flash.
Use flashes with a sync voltage of 400 V or lower.
Turn off the flash connected to the sync cord when you connect the sync cord to the
when the sync cord is connected.
The flash power level is set to full power. [Flash Comp.] cannot be set.
Auto white balance function is not recommended. Use the custom white balance function to achieve a more accurate white balance.
When a flash is connected to the
Related Topic
(flash sync) terminal (A), and connect the cord.
(flash sync) terminal, the flash indicator will not be displayed.
(flash sync) terminal. Otherwise, the flash may emit light
219