Table of Contents
Advertisement
Read the QR code displayed on the monitor of this product with the smartphone.
4
Once the QR code has been read, a message [Connect with the camera?] will be displayed on the smartphone screen.
Select [OK] on the smartphone screen.
5
The smartphone is connected to the product.
You can now shoot images remotely while checking the composition on the smartphone screen.
Hint
Once the QR code has been read, this product's SSID (DIRECT-xxxx) and password are registered to the smartphone. This enables you to easily
connect the smartphone to the product via Wi-Fi at a later date by selecting the SSID. (Set [Ctrl w/ Smartphone] to [On] in advance.)
Note
Radio wave interference may occur as Bluetooth communications and Wi-Fi communications use the same frequency band. If your Wi-Fi
connection is unstable, it may be improved by turning off the Bluetooth function of the smartphone. If you do this, the location information link
function is not available.
If you cannot connect your smartphone to this product using the [One-touch(NFC)] function or QR code, use the SSID and password.
Related Topic
PlayMemories Mobile
Controlling the camera using an Android smartphone (SSID)
4-728-781-11(1) Copyright 2017 Sony Corporation
354
Advertisement
Table of Contents
