Table of Contents
Advertisement
Plays back movies recorded with the product on a PAL/NTSC system TV.
1. MENU →
Note
This function is provided with 1080 50i-compatible devices only. It is not provided with
1080 60i-compatible devices. The 1080 50i-compatible devices have a "50i" mark on the
bottom of the product.
If you insert a memory card that has previously been formatted with the PAL system, a
message telling you that you must re-format the card appears. When you record using the
NTSC system, re-format the memory card or use another memory card.
When the NTSC mode is selected, the "Running on NTSC." message always appears on
the start-up screen each time you turn the product on.
[194] How to Use
Cleaning Mode
Allows you to clean the image sensor.
1. Confirm that the battery has been charged sufficiently.
2. MENU →
3. Turn off the product following the instructions on the screen.
4. Detach the lens.
5. Push the mirror lock lever (A) and open the mirror.
6. Use the blower to clean the image sensor surface and the surrounding area.
(Setup) → [PAL/NTSC Selector] → [Enter]
Changing settings
(Setup) → [Cleaning Mode] → [Enter]
Setup menu
Advertisement
Table of Contents
