Table of Contents
Advertisement
Black Gamma
Corrects gamma in low intensity areas.
[Black Gamma] is fixed at "0" and cannot be adjusted when [Gamma] is set to [HLG], [HLG1], [HLG2], or [HLG3].
Range: Selects the correcting range. (Wide / Middle / Narrow)
Level: Sets the correcting level. (-7 (maximum black compression) to +7 (maximum black stretch))
Knee
Sets knee point and slope for video signal compression to prevent over-exposure by limiting signals in high intensity areas
of the subject to the dynamic range of your camera.
[Knee] is disabled if [Mode] is set to [Auto] when [Gamma] is set to [Still], [Cine1], [Cine2], [Cine3], [Cine4],
[ITU709(800%)], [S-Log2], [S-Log3], [HLG], [HLG1], [HLG2], or [HLG3]. To enable [Knee], set [Mode] to [Manual].
Mode: Selects auto/manual settings.
Auto: The knee point and slope are set automatically.
Manual: The knee point and slope are set manually.
Auto Set: Settings when [Auto] is selected for [Mode].
Max Point: Sets the maximum point of the knee point. (90% to 100%)
Sensitivity: Sets the sensitivity. (High / Mid / Low)
Manual Set: Settings when [Manual] is selected for [Mode].
Point: Sets the knee point. (75% to 105%)
Slope: Sets the knee slope. (-5 (gentle) to +5 (steep))
Color Mode
Sets type and level of colors.
In [Color Mode], only [BT.2020] and [709] are available when [Gamma] is set to [HLG], [HLG1], [HLG2], or [HLG3].
Movie: Suitable colors when [Gamma] is set to [Movie].
Still: Suitable colors when [Gamma] is set to [Still].
Cinema: Suitable colors when [Gamma] is set to [Cine1] or [Cine2].
Pro: Similar color tones to the standard image quality of Sony professional cameras (when combined with ITU709 gamma)
ITU709 Matrix: Colors corresponding to ITU709 standard (when combined with ITU709 gamma)
Black & White: Sets the saturation to zero for shooting in black and white.
S-Gamut: Setting based on the assumption that the pictures will be processed after shooting. Used when [Gamma] is set
to [S-Log2].
S-Gamut3.Cine: Setting based on the assumption that the pictures will be processed after shooting. Used when [Gamma]
is set to [S-Log3]. This setting allows you to shoot in a color space that can easily be converted for digital cinema.
S-Gamut3: Setting based on the assumption that the pictures will be processed after shooting. Used when [Gamma] is set
to [S-Log3]. This setting allows you to shoot in a wide color space.
BT.2020: Standard color tone when [Gamma] is set to [HLG], [HLG1], [HLG2], or [HLG3].
709: Color tone when [Gamma] is set to [HLG], [HLG1], [HLG2], or [HLG3] and movies are recorded with HDTV color
(BT.709).
Saturation
Sets the color saturation. (-32 to +32)
Color Phase
Sets the color phase. (-7 to +7)
240
Advertisement
Table of Contents
