Using A Flash With A Sync Terminal Cord - Sony ILCE-7RM4A Help Manual

Interchangeable lens digital camera

Hide thumbs Also See for ILCE-7RM4A:

Table of Contents

Interchangeable Lens Digital Camera

Using a flash with a sync terminal cord

Open the cover of

If the screen is too dark to check the composition, set [Live View Display] to [Setting Effect OFF] to make it easy to check the

composition when shooting with a flash.

Flashes that have a sync terminal with reversed polarity can be used with this product.

Set the exposure mode to manual exposure (other than ISO AUTO is recommended for ISO sensitivity), and set the shutter

speed to the slower of the following values or slower:

1/200 seconds

The shutter speed recommended by the flash.

Use flashes with a sync voltage of 400 V or lower.

Turn off the flash connected to the sync cord when you connect the sync cord to the

may emit light when the sync cord is connected.

The flash power level is set to full power. [Flash Comp.] cannot be set.

Auto white balance function is not recommended. Use the custom white balance function to achieve a more accurate white

When a flash is connected to the