Redial Example Using Phone Key From Live-Dial Mode; Storing Redial Records - VTech PDL GX Manual

V
TECH
TITLE PDL GX Internal Product Specification
MODEL PDL GX

3.6.1.2 Redial Example Using PHONE key from Live-Dial Mode:

Assume that the user has made 4 previous telephone calls to the following numbers in the following order:
233 4566, 876 1356 , 455 5677 and 257 3356.
Phone State: Live Dial Mode (Off-Hook) and user has not entered any digits.
1. To recall the 3rd most recent dialed number from the redial
memory, the user first presses the SELECT key and the
following menu item is displayed:
2. The user presses the SELECT key again in order to enter the
REDIAL MEMORY function. The phone number of the last call
made is displayed:
3. To select the 3rd most recently dialed number, the user scrolls
back through the redial list by pressing the
number R3 is found:
4. The user presses the PHONE key to dial the number and
complete the call.

3.6.2 Storing Redial Records

Phone numbers are stored in redial memory only when the phone goes off hook and the call is made. Any
subsequent digits entered after the phone has gone off-hook (post line seizure or live dialing) will be
appended to the number and saved in the redial memory up to the maximum of 20 digits.
If a user enters a phone number using pre-dial and does not go off-hook, the number will not be saved in
redial memory.
Any subsequent dialing digits entered after the PHONE key is pressed (live dialing) will also be stored. A
combination of the first 20 digits whether pre-dialed and live-dialed will be stored; In the case where there
are less than 20 digits, storage will be triggered by activation of a line flash or an OFF key press.
After a hook switch flash, the numbers previously dialed are immediately saved in the current redial
memory location and all subsequent numbers after the flash are recorded in a new redial memory
location.
Reference: PRC 00DM
This document is proprietary to V
Specifications are preliminary and are subject to change without notice.
E
NGINEERING
key until record
Revision: 3.0
E C L
TECH NGINEERING ANADA
C L
ANADA
SFEJBM SFEJBM
SFEJBM SFEJBM
NFNPSZ NFNPSZ NFNPSZ NFNPSZ
S2!3684467 S2!3684467
S2!3684467 S2!3684467
S4!9872467 S4!9872467
S4!9872467 S4!9872467
!9872467] !9872467]
!9872467] !9872467]
.
TD
IMITED
Page: 24 of 56
26649