Clearing The Visual Message Waiting Indicator (If Vmwi Option Is Supported) - VTech PDL GX Manual

V
TECH
TITLE PDL GX Internal Product Specification
MODEL PDL GX

3.10.3 Clearing The Visual Message Waiting Indicator (If VMWI Option is Supported)

Note: If VMWI is supported as indicated by a status bit in EEPROM memory, then this sub-menu
item will be displayed.
The following example shows how to clear the VMWI:
Phone State: On Hook
1. Press the SELECT key to activate the menu. The following will
be displayed:
2. Use the keys to select the CLEAR MEMORY menu item:
3. Press the SELECT key to enter the CLEAR MEMORY function
and the following will be displayed:
4. Use the keys to choose the desired memory item to clear.
In this example, the user will select CLEAR VMWI.
5. Press and hold the 0 key to select the item to be cleared.
After 1 second, the following message will be displayed to ask
the user to confirm the clear:
6. Press the 0 key again to clear the selected item. While the item
is being cleared, the following confirmation message.
7. After 5 seconds the display will return to the CLEAR MEMORY
display item:
Note: Clearing VMWI will turn off both the message indicator on the handset and the LED indicator on the
base. This allows the user to clear the indicators if the Messaging service fails to update the no message
waiting status to the user.
Reference: PRC 00DM
This document is proprietary to V
Specifications are preliminary and are subject to change without notice.
E
NGINEERING
Revision: 3.0
E C L
TECH NGINEERING ANADA
C L
ANADA
SFEJBM SFEJBM
SFEJBM SFEJBM
NFNPSZ NFNPSZ NFNPSZ NFNPSZ
DMFBS DMFBS DMFBS DMFBS
NFNPSZ NFNPSZ NFNPSZ NFNPSZ
DMFBS!DJE DMFBS!DJE DMFBS!DJE DMFBS!DJE
NFNPSZ NFNPSZ
NFNPSZ NFNPSZ
DMFBS!WNXJ DMFBS!WNXJ
DMFBS!WNXJ DMFBS!WNXJ
DMFBS!WNXJ@ DMFBS!WNXJ@
DMFBS!WNXJ@ DMFBS!WNXJ@
1>ZFT!PGG>OP 1>ZFT!PGG>OP 1>ZFT!PGG>OP 1>ZFT!PGG>OP
DMFBSJOH DMFBSJOH
DMFBSJOH DMFBSJOH
WNXJ WNXJ WNXJ WNXJ
DMFBS DMFBS
DMFBS DMFBS
NFNPSZ NFNPSZ NFNPSZ NFNPSZ
.
TD
IMITED
Page: 37 of 56
26649