How To Charge The Charger - ReSound LiNX Quattro User Manual

1. During the charging process, the LED on the hearing aid slowly pulsates until the hearing aid is
fully charged. When fully charged, the LED stays solid on until the hearing aid is removed from
the charger.
When charging When fully charged
Pulsating On – until removed
2. The five LEDs at the front of the charger indicate the battery level of the hearing aids. Upon
insertion or removal of the hearing aids, the LEDs show the battery level of the hearing aid with
the lowest battery level. The LEDs indicate the battery level for 10 seconds and then turn off.
However, the hearing aids will continue to charge.
14
3. While charging, the hearing aid LED indicates the battery status. The hearing aids are fully
charged within 3 hours.
Hearing aid battery indicators
LEDs Battery level
0-20%
●
20-40%
● ●
40-60%
● ● ●
60-80%
● ● ● ●
80-100%
● ● ● ● ●

7.2 How to charge the charger

1. Plug the supplied power adaptor into a power
outlet and connect the charging cable to the
hearing aid charger.
15