Turn On / Turn Off; Smart Start - ReSound LiNX Quattro User Manual

The three LEDs at the back of the charger show the battery level of the hearing aid charger. One LED
blinking red indicates that the charger battery level is low. In that case, recharge the charger. Three green
LEDs indicate fully charged.
When the hearing aid charger is fully charged, it has a capacity of at least 3 full hearing aid charges
before it needs to be plugged in and recharged.
LEDs Battery level
LED is blinking red. Less than 10 % power
●
reserve.
10 - 33% charged
●
33 - 66% charged
● ●
66 - 100% charged
● ● ●
i
CAUTION: FOR SAFETY REASONS, ONLY USE THE CHARGER SUPPLIED BY RESOUND.
i
NOTE: When charging your hearing aid charger for the first time, let it charge for at least 3
hours, even if the battery LED indicator indicates that the battery is fully charged.
i
NOTE: It is safe to leave the charger connected overnight – the batteries in both the hearing
aid charger and the hearing aids cannot be overcharged.
16

7.3 Turn on / Turn off

The hearing aids are automatically turned on when they are removed from the hearing aid charger. They
can also be turned on and off manually by pressing the push button.
1. Turn on, press button for 5 seconds.
2. Turn off, press button for 5 seconds.
i
NOTE: When the hearing aid turns on, the LED lights up.
When the hearing aid turns off, the LED flashes 3 times.
i
NOTE: If the charger is not connected to a power socket, the hearing aids
will turn off after 24 hours.
If the charger has run out of power, the hearing aids will be powered down, and you will have
to turn on the hearing aids by manually pressing the push button for 5 seconds.

7.3.1 Smart Start

Smart Start delays the time before the hearing aid turns on after the hearing aid is removed from the
hearing aid charger. With Smart Start, you will hear a beep for each second of the delay period (5 or 10
seconds delay).
i
NOTE: If you want your hearing aids to turn on immediately, ask your hearing care profes-
sional to deactivate Smart Start.
17