Table of Contents
Advertisement
•
On the right, law the cable under the end cap housing;
•
While in the opposite side, disconnect the hidden cables, keeping the male connector outside and
the female connector inside the end cap housing;
•
Close the end caps housing, reassembling the finishing plastic cover (in the right side) and the plastic
cover & bushing (in the left side);
•
At the lower part, remove the right-hand clicking bushing;
•
On the left side, remove the bushing and place it in the opposite side where the right-hand clicking
bushing was installed
•
Install the the left-hand clicking bushing which is available on the Kit
•
Repeat the same procedure indicated above to install the clicking Bushing on the Freezer Door
MSEX0105i – Electronic No Frost Refrigerator Bottom Mount/ Dual Fan - Maestro High
36
Hide quick links:
Advertisement
Table of Contents
