Table of Contents
Advertisement
Be careful when handling the Evaporator, due to it blades has sharp edges and can cut your hands.
The sides of the Evaporator are provided with 2 EPS shims that will cause the whole of the return air to
pass through the Evaporator instead its sides.
If they are missing, problems could occur such as low refrigeration or frost
In the event of Evaporator replacement, proceed as follows:
a) Order a new Evaporator assy and 2 Lokring connectors, according to:
Description
Lokring Connection
Evaporator Assembly 326.046.948
Note: The Evaporator assy include chute and defrost heater which should be replaced simultaneously due to the
possibility of defrost heater damage while removing from the old evaporator , causing electrical escape.
b) Remove the damaged Evaporator by releasing the Defrost Sensor, Heater connectors, EPS shims
and then the Lokring connectors;
MSEX0105i – Electronic No Frost Refrigerator Bottom Mount/ Dual Fan - Maestro High
WARNING
Always wear protective gloves.
Left Shim
Those shims should not be removed from the product.
formation in the Freezer compartment.
Part Number
326.008.340
Right Shim
IMPORTANT
Models Application
ARC8140IX
ARC8140IX
R-600a
Fluid Load (g)
--
58g
28
Hide quick links:
Advertisement
Table of Contents
