Control Panel; What Appears On The Display - Pfaff 1571 Instruction Manual

Operating Controls
7

Control panel

.11
Machine functions for set-up and sewing, to enter parameters and service settings are
displayed and called up via the control panel.
The control panel consists of the following operating and display controls:
 The display 1 comprises a two-line alphanumeric LCD display with 16 characters per
 The +/- keys 2 are used to select or change the functions and parameters displayed.
 The function keys 3 are used to switch the relevant function on or off. Switched-on
7

What appears on the display

.11.01
Besides the texts and setting values, the following symbols are shown on the display.
The symbols appear solely in programmed sewing mode, see chapter 10.02 Programmed
sewing.
24
1
2
Fig. 7 - 11
line and is used to display relevant information and the selection of parameters.
functions are each indicated by an illuminated LED lamp.
Current program number
P
Current seam section
Seam input via "teach-in"
T
Deleting a program
DEL
Stitch count in the current seam zone
Maximum speed in the current seam zone
Stitch length (feed motion) for the roller presser
Stitch length (feed motion) for the feed wheel
.
3