PTU-D300 User's Manual (v2.19)
The PTU-D300 Pan-Tilt Unit from FLIR Commercial Systems, Inc. provides fast, accurate,
and durable positioning of cameras, antennas, lasers, and other large payloads. Some general
features:
•
Simple to command from any RS-232 or RS-485 terminal or computer
•
Payload capacity up to 35-70 lbs.
•
Resolution of 0.02 degrees
•
Precise control of position, speed & acceleration
•
On-the-fly position and speed changes
•
Self calibration upon reset
•
Power consumption can be controlled from host
•
ASCII command mode for simplicity, binary commands available for efficient program
control
•
Constant current DMOS motor drives for increased performance and control
•
DC power input from an unregulated source
•
Flexible connectivity options.
Applications of the PTU-D300 include:
•
Mid and Long-range Surveillance systems
•
Automated detection and tracking
•
Multi-sensor perimeter monitoring systems
•
Thermal and IR cameras
•
Marine/shipboard sensor systems
•
Harbor and Port Security
•
Border Security & Law Enforcement
•
Highway & Transportation Monitoring
•
Military special operations
•
Satellite communications systems
•
Microwave antenna systems (passive, active)
•
Robotics & computer vision.
This User's Manual provides information needed to set up and operate the PTU-D300 unit. The
next section provides a brief overview to allow you to get started as quickly as possible. More
detailed technical information is provided in the remaining sections.
1 INTRODUCTION
INTRODUCTION
page 1