Table of Contents
Advertisement
Grounding the IE-SW-IP67(T)-5M12
Grounding and wire routing help limit the effects of noise due to
electromagnetic interference (EMI). Run the ground connection from the
ground screw to the grounding surface prior to connecting devices.
ATTENTION
This product is intended to be mounted to a well-grounded
mounting surface such as a metal panel.
10/100BaseT(X) Ethernet Port Connection
The IE-SW-IP67(T)-5M12 has 5 10/100BaseT(X) Ethernet ports (4-pin
shielded M12 socket with D coding). The 10/100BaseTX ports located
on the front panel are used to connect to Ethernet-enabled devices.
Most users configure these ports for Auto MDI/MDI-X mode, in which
case the port's pinouts are adjusted automatically depending on the
type of Ethernet cable used (straight-through or cross-over), and the
type of device (NIC-type or HUB/Switch-type) connected to the port.
In what follows, we give pinouts for both MDI (NIC-type) ports and MDI-
X (HUB/Switch-type) ports. We also give cable wiring diagrams for
straight-through and cross-over Ethernet cables.
Ethernet Switch
6
Advertisement
Table of Contents
