Outputs; Connections And Signals Overview - Sauer Danfoss JS6000 User Manual

Outputs

JS6000_XY Function Block Outputs
Output Type
Status
Status_X, U16
Status_Y
Fault
Fault_X, U16
Fault_Y
Out
X_Axis_Psn, S16
Y_Axis_Psn
Btn1–Btn8 BOOL

Connections and Signals Overview

6
PLUS+1 Compliant JS6000 XY-Axis Joystick Function Block
User Manual
JS6000_XY Function Block
Range Description
Reports the function block's status.
This output uses the standard bitwise scheme described in the
—— Indicates the calibration and setup condition of the X and Y inputs.
– 0x0000 = Block is OK.
– 0x8001 = Block is not calibrated.
– 0x8002 = Block is partially calibrated.
– 0x8008 = Invalid setup/calibration.
Reports the function block's faults.
This output uses the standard bitwise scheme described in the
—— Indicates the operating condition of the X and Y inputs.
– 0x0000 = Block is OK.
– 0x8001 = Input value is too low.
– 0x8002 = Input value is too high.
– 0x8004 = Short circuit.
– 0x8008 = Open circuit.
Outputs a bus that contains Psn and Btn signals.
±10000 Indicates the position of the joystick base's y and x-axes.
– -10000 = -100.00%.
– 0 = 0%.
– +10000 = +100.00%.
—— Indicates the state of the joystick grip's pushbuttons.
11007142 · Rev BA · September 2011
Basic Function Blocks Library User's
Basic Function Blocks Library User's
Manual.
Manual.