Outputs - Sauer Danfoss JS1000 User Manual

Outputs

JS1000_CAN Function Block Outputs
Output Type
Status ——
Btn1_NA– BOOL
Btn12_NA
T_Det_NA BOOL
T_NA BOOL
Grp_Det_NA BOOL
Grp_NA BOOL
GrpRaw_NA BOOL
_Det_NA BOOL
_NA BOOL
YGrp_Det_NA BOOL
YGrp_NA BOOL
Y_Det_NA BOOL
PLUS+1 Compliant JS1000 Joystick with CAN Function Block
User Manual
JS1000_CAN Function Block
Range Description
—— Outputs a bus that contains the following status signals.
—— Indicates if an input is available from a grip-mounted push button switch.
T = Not available.
F = Available.
—— Indicates if an input from a detent switch on the joystick's rotational (theta) axis is
available.
T = Not available.
F = Available.
—— Indicates if an input from a rotational (theta) axis is available.
T = Not available.
F = Available.
—— Indicates if an input from a grip-mounted, x-axis detent switch is available.
T = Not available.
F = Available.
—— Indicates if an input from a grip-mounted, x-axis, proportional switch is available.
T = Not available.
F = Available.
—— Indicates if an input from a grip-mounted, x-axis, proportional switch is available with
the raw data format.
T = Not available.
F = Available.
—— Indicates if an input from a grip-mounted, x-axis, detent switch is available.
T = Not available.
F = Available.
—— Indicates if an input from the joystick's x axis is available.
T = Not available.
F = Available.
—— Indicates if an input from a grip-mounted, y-axis detent switch is available.
T = Not available.
F = Available.
—— Indicates if an input from a grip-mounted, y-axis, proportional switch is available.
T = Not available.
F = Available.
—— Indicates if an input from a grip-mounted, y-axis, detent switch is available.
T = Not available.
F = Available.
11007135 Rev AC May 2010
5