3 Function and operation
> Press the
button to quit the
you previously changed the temperature without
save
pressing the
button, this change will not be
remembered.
eco
3.1.4
Setting the
eco
The
function is a function that saves water and
eco
energy. If the
function is activated, the unit output is
reduced.
eco
> Press the
button to activate the function.
> Press the
eco
button again to deactivate the function.
max. 42 °C
38.0 °C
-
+
eco
If the
function is activated, it will be shown on the
top-right of the display.
3.1.5
Activating/deactivating the key lock
> Press and hold both the + and — buttons at the same
time for longer than 3 seconds.
> Press and hold both the + and — buttons at the same
time for longer than 3 seconds again to deactivate
the key lock.
i
When the key lock is activated, pressing any
display button will not have any effect; all
functions are locked.
8
Memory
function. If
function
MEMO
eco
Operating instructions for the electronicVED plus electric instantaneous water heater 0020149585_00
3.1.6
Calling up the menu and going back to the
temperature display
> Briefly press the
ously to reach the
> Briefly press the
ture display.
Menu
Display settings
Scald protection
Consumption
Select language
eco
All the basic VED settings will be carried out from this
menu.
i
Use the
menus one step at a time.
> Continuously press the
play screen is shown again.
-
MEMO
eco
and
buttons simultane-
Menu
.
button to return to the tempera-
ok
button to go back through the
button until the initial dis-
max. 42 °C
42.0 °C
+
MEMO
eco