Key Combinations On The Display; Setting The Water Temperature; Saved Temperatures ( Memo 1 To 4) - Vaillant electronicVED plus Operating And Installation Instructions

3.1.1

Key combinations on the display

Key combination
Briefly press MEMO and eco
simultaneously
Press MEMO for longer than
3 seconds
Press — and + simultaneously
for longer than 3 seconds
Tab. 3.1 Display key combinations
3.1.2

Setting the water temperature

> Press the + button to increase the water temperature.
> Press the — button to decrease the water tempera-
ture.
i
The water temperature can be increased or
decreased in increments of half a degree Cel-
sius. The range of temperatures that can be
selected is between 20 °C and 60 °C.
3.1.3 Saved temperatures (
MEMO
The memo function allows the current hot water
temperature to be changed quickly. By pressing the but-
ton twice you can set the desired temperature to one of
4 preset temperatures.
i
You can change the preset temperatures at
any time. However, note that you cannot set a
higher temperature than the maximum tem-
perature set in the
see section 3.1.7.
> Briefly press the MEMO
You will see the following display screen:
Operating instructions for the electronicVED plus electric instantaneous water heater 0020149585_00
Result
Main menu for setting basic func-
tions, such as the scald protection
function, language settings and
energy consumption.
Installer level menu to call up unit
parameters.
Key lock is activated. To cancel
the lock once more, press — and +
for longer than 3 seconds.
MEMO
1 to 4)
Scald protection
menu;
button once.
Function and operation 3
35 °C 38 °C
M1 M2

> Briefly press the button that corresponds to your
desired temperature, e.g.
You will see the following display screen:
max. 42 °C
42.0 °C
- +

The desired preset temperature is selected.
> If you want to change the desired preset temperature,
M3
press the button for 3 seconds.
You will see the following display screen:
Memory 3
42.0 °C
- +

The current saved temperature and the memory location
Memory
(here: 3) are displayed.
> Use the + and — buttons to change the
perature that is displayed.
> Briefly press the save
perature.
42 °C 50 °C
M3 M4
 
M3
.
MEMO eco
 

save
 
Memory
button once to save this tem-
eco
tem-
7