Calling Up The Installer Menu; Displaying Unit Parameters - Vaillant electronicVED plus Operating And Installation Instructions

5.3.1

Calling up the installer menu

MEMO
> Press and hold the
3 seconds to reach the installer menu.
Appliance data

Remote control

 

Using this menu, you have access to the current and
Appliance data
cumulated
5.3.2

Displaying unit parameters

You are in the installer menu. The cursor is next to the
Appliance data
menu point.
> Press the ok
button.
Appliance data
current

cumulated
 

The cursor is next to the
> Press the ok
button.
Installation instructions for the electronicVED plus electric instantaneous water heater 0020149585_00
button for longer than

ok
 
.

ok
 
current
menu point.
Starting up/decommissioning 5
Current appl. data
Inlet temp.
Desired temp.
Outlet temp.
Output
Flow rate
 

The following information is displayed:
Inlet temp.
Desired temperature
Outlet temp.
Output
Flow rate
Tab. 5.1 Current appliance data

> Press the
button to return to the
menu.
The cursor is next to the

> Press the
button.
The cursor is next to the
> Press the ok
button. The cumulated appliance data
will be displayed.
Appl. data history
Operated time
Period of use
Energy
Water
 

21 °C
38 °C
12.0 kW
8.0 l/min

ok
 
The current temperature of the
drinking water, as measured at the
unit's cold water inlet.
The target temperature set on the
unit for the hot water output.
The current temperature of the
hot water, as measured at the hot
water outlet.
The unit's current output, meas-
ured in kilowatts.
The current flow rate, measured in
litres per minute.
Appliance data
current
menu point.
cumulated
menu point.
548 h
112 h
107 kW
2538 Litres

ok
 
---
15