Tait TOP Operation And Service Manual page 37

Modify TOP PCB (top side)
3
Midian Encryption Programming and Service Manual
June 2006 © Tait Electronics Limited
1. Locate the can with large hole cut as shown
2. If there is no large hole in the can, cut carefully with sidecutters
where shown, and turn the edges in
3. Remove capacitor C567 using a hot air gun and tweezers
4. Remove component R646 using a hot air gun and tweezers, and
replace with 4K7 resistor (IPN 038-14470-00)
5. Remove component R4 using hot air gun and tweezers
2
5
Tait Orca Portable (TOP) Encryption
1
37