Remote Access By Phone - Olympia Protect Series Operating Manual

REMOTE ACCESS BY PHONE

Remote Access by Phone
The wireless alarm system can be operated by remote
access using a telephone.
1
Dial the phone number of the SIM card installed in
the base unit.
2
Wait until the base unit takes your call. A longer
acoustic signal is issued.
3
Enter the 4-digit entry code on the base unit. You will
hear two short acoustic tones.
4
Complete various functions using the phone's keypad
(refer to the table). The monitoring functions are con-
P
36
ROTECT
Key Function
1 Activate the handsfree function
2 Activate call screening
3 Activate Alarm mode
4 Activate At Home mode
5 Activate Silent mode
6 Activate Disarmed mode
# Stop the Handsfree / Call screening function
#, # End remote access