Monitoring Functions - Olympia Protect Series Operating Manual

MONITORING FUNCTIONS

Monitoring Functions
You can adapt the alarm system according to your own personal needs. The table below provides an overview of how
the base unit of your alarm system reacts to each respective monitoring function when activated.
Pay attention that, in general, the warning signal is issued by the base unit. If you have deactivated the warning
signal on the base unit and there is no outdoor siren installed, the alarm system remains silent in every moni-
toring function!
Before switching any functions on, inform all the other people living in the residence regarding the location and
method of operation of the wireless alarm system.
Monitoring function
Alarm mode
At Home mode
Silent mode
Disarmed mode
Panic alarm
Emergency call (SOS)
PIR At Home mode
Smoke and water detector
SOS / Panic alarm (remote control)
P
30
ROTECT
Alarm signal
Yes
Yes
No
No
Yes
No
See Section
See Section
See Section Function of the
Telephone unit (GSM)
Yes
No
Yes, with screening function
No
No
Yes, with screening function