Setting The Arming Delay; Setting The Alarm Period; Switching The Warning Signal From The - Olympia Protect Series Operating Manual

SETTING UP THE BASE UNIT

Setting the Arming Delay

You can set the alarm system to be armed following a
ment or house through the alarm-protected front door
before the alarm system is actually armed.
You can set an arming delay between 0 and 240 seconds.
During the delay period, you will hear a signal tone issued
at intervals of one second.
1
Select the Alarm Setup menu option.
2
3
Select the Arming Delay menu option.
4
5
Set the delay time.
6

Setting the Alarm Period

The base unit is equipped with its own siren.
The duration of the warning signal can be selected
between a minimum of 1 minute to a maximum of 10
minutes.
P
28
ROTECT
.
.
.
Observe any locally applicable regulations regard-
ing limitation of alarm times from burglar alarms.
-
1
Select the Alarm Setup menu option.
2
3
Select the Alarm Period menu option.
4
5
Set the alarm period.
6
Switching the Warning Signal from the Base
This function enables the warning signal from the base
This setting is useful, for example, if you have
installed an additional outdoor siren. If an alarm is
triggered, the outdoor siren issues a loud warning
signal and alerts others to the situation. The base
.
.
.