9
Installing the Assay Definition File
The Assay Definition File of the DiagCORE
Analyzer previously to execute tests with the DiagCORE
The same procedure has to be applied when a new version of the DiagCORE
assay is released.
NOTE
To import new assays from the USB to the DiagCORE
1.
Insert the USB stick with the Assay Definition File on one of the USB ports of the DiagCORE
Analyzer.
2.
Press the Options button and then the Assay Management button. The Assay
Management screen appears on the content area of the display (See screenshot below).
42
DiagCORE Respiratory Panel 2 Instructions for Use
Respiratory Panel 2 has to be installed in the DiagCORE
®
Assay Definition Files are available on the STAT-Dx web site and also through the
STAT-Dx sellers/distributors.
The Assay Definition File (extension.asy) must be saved into a USB Drive previously
to the installation on the DiagCORE
with a FAT32 file system.
Respiratory Panel 2 cartridges.
®
Analyzer. This USB Drive must be formatted
®
Analyzer proceed with the following steps:
®
®
Respiratory Panel 2
®
®