Table of Contents
Advertisement
Name
Failed
Successful
Please make sure a printer is connected to DiagCORE system and proper driver is installed. Press
Print Report to print the report(s) for the selected result(s).
Press Save Report to save the report(s) for the selected result(s) in PDF format to an external USB
storage device.
Select the report type: List of Tests or Test Reports.
Press the Search button to search the test results by Sample ID, Assay and Operator ID. Enter the
search string using the virtual keyboard, and press Enter to start the search. Only the records
containing the search text will be displayed in the search results.
If the results list has been filtered, the search will only apply to the filtered list.
Press and hold a column headline to apply a filter based on that parameter. For some parameters,
such as Sample ID, the virtual keyboard will appear so the search string for the filter can be entered.
For other parameters, such as Assay, a dialog will open with a list of assays stored in the repository.
Select one or more assays to filter only the tests that were performed with the selected assays.
The
symbol to the left of a column headline indicates that the column's filter is active.
A filter can be removed by pressing the Remove Filter button in the submenu bar.
8.1.4 Exporting results to a USB drive
From any tab of the test results screen, select Save Report to export and save a copy of the test
results in PDF format to a USB drive. The USB port is located on the front of the instrument.
8.1.5 Printing results
Please make sure a printer is connected to DiagCORE system and proper driver is installed.
Select Print Report to send a copy of the test results to the printer.
8.2 Result interpretation
A result for a respiratory organism is interpreted as "Positive" when the corresponding PCR assay is
positive, except for Influenza A. The Influenza A assay in the DiagCORE
designed to detect Influenza A as well as Influenza A subtype H1N1/2009, Influenza A subtype H1or
Influenza A subtype H3, respectively. In particular, this means:
In case seasonal Influenza A H1 strain is detected by the DiagCORE
assay, two signals will be generated, one for Influenza A and a second one for H1 strain
and shown on the DiagCORE
40
DiagCORE Respiratory Panel 2 Instructions for Use
Button
Description
fail
The test failed, either because an error occurred or the test was
cancelled by the user.
suc
The test is either positive or negative, but the user does not have the
access rights to view the test results.
Analyzer screen.
®
Respiratory Panel 2 is
®
Respiratory Panel 2
®
Advertisement
Table of Contents
